1-phase flters fn 610 general purpose emi flter approvals n rated currents from 1 to 30a n good overall differential and common- mode attenuation n optional medical versions (b type) n optional safety versions (a type) typical applications n fn 610 filters are designed for easy and fast chassis mounting. n fn 610 filters offer a perfect combination of performance/size ratio. n all filters provide a good symmetrical and asymmetrical attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior. n general purpose filter attenuation perform- ance suitable to be used in a broad range of applications. n multiple terminal connections like faston with additional spade solder possibility, wire connection and screw connection. n optional safety (a type) or medical (b type) versions with low leakage current. n fn 610 filters are also available as two- stage filters (fn 660, fn 670 series). n custom-specific versions on request. n electrical and electronical equipment n consumer goods n household equipment n medical equipment n office automation equipment n datacom equipment features and benefits technical specifications maximum continuous operating voltage: 250vac, 50/60hz operating frequency: dc to 400hz rated currents: 1 to 30a @ 40c max. high potential test voltage: p C> e 2000vac for 2 sec p C> e 2500vac for 2 sec (b types) p C> n 760vac for 2 sec temperature range (operation and storage): -25c to +100c (25/100/21) flammability corresponding to: ul 94v-2 or better design corresponding to: ul 1283, csa 22.2 no. 8 1986, iec/en 60939 mtbf @ 40c/230v (mil-hb-217f): 1,200,000 hours typical electrical schematic p e n line cx r l cy p n load
> components > fn 610 filter* rated current leakage current** inductance capacitance resistance input/output weight @ 40c (25c) @ 230vac/50hz l cx cy r connections -03/-06 -07 [a] [a] [mh] [nf] [nf] [k] [g] [g] filter selection table fn 610-1-.. 1 (1.15) 190 3 33 2.2 -06 -07 55 65 fn 610-3-.. 3 (3.4) 190 2 33 2.2 -06 -07 60 70 fn 610-6-.. 6 (6.9) 190 0.75 33 2.2 -06 -07 60 70 fn 610-10-.. 10 (11.5) 190 0.45 33 2.2 -06 -07 85 95 fn 610-20-06 20 (23) 190 0.48 33 2.2 -06 220 fn 610-30-03 30 (34) 190 0.61 33 2.2 -03 630 fn 610a-1-.. 1 (1.15) 40 3 33 0.47 1000 -06 -07 55 65 fn 610a-3-.. 3 (3.4) 40 2 33 0.47 1000 -06 -07 60 70 fn 610a-6-.. 6 (6.9) 40 0.75 33 0.47 1000 -06 -07 60 70 fn 610a-10-.. 10 (11.5) 40 0.45 33 0.47 1000 -06 -07 85 95 fn 610b-1-.. 1 (1.15) 2 3 33 1000 -06 -07 55 65 fn 610b-3-.. 3 (3.4) 2 2 33 1000 -06 -07 60 70 fn 610b-6-.. 6 (6.9) 2 0.75 33 1000 -06 -07 60 70 fn 610b-10-.. 10 (11.5) 2 0.45 33 1000 -06 -07 85 95 fn 610b-20-06 20 (23) 2 0.48 33 1000 -06 220 * to compile a complete part number, please replace the -.. with the required i/o connection style (e.g. fn 610-1-06, fn 610b-30-03). ** maximum leakage under normal operating conditions. note: if the neutral line is interrupted, worst case leakage could reach twice this level. per cispr 17; a = 50/50 sym; b = 50/50 asym; c = 0.1/100 sym; d = 100/0.1 sym typical filter attenuation 1 to 6a types 10 and 20a types 30a types
> components > fn 610 mechanical data connection style -06, 1 to 10a types a c b e g k f d i j h l m n connection style -03, 30a types a c b e g k f n i j h l m d q connection style -07, 1 to 10a types (same dimensions as style -06) bn p bu gnye o bn bu connection style -06, 20a types a c b e g k f d i j h l m n your local partner: to find your local partner within schaffners global network, please go to www.schaffner.com july 2007 1a 3a 6a 10a 20a 30a tolerances all dimensions in mm; 1 inch = 25.4mm tolerances according: iso 2768 / en 22768 dimensions a 64 64 64 64 71 105 0.5 b 35 35 35 35 52.6 126 0.5 c 19.3 19.3 19.3 29.3 29.3 38.6 1 0.5 d 43.5 43.5 43.5 43.5 50.5 84.5 1 0.3 e 32.5 32.5 32.5 32.5 50.5 98.5 1 0.5 f 54 54 54 54 61 95 0.2 g 21 21 21 21 21 40 0.5 h 9.3 9.3 9.3 9.3 14.3 19.6 0.5 i 15.3 15.3 15.3 15.3 20.3 10.1 0.5 j 16.25 16.25 16.25 16.25 25.25 42.25 0.5 k 5.3 5.3 5.3 5.3 5.3 4.4 l 6.3 6.3 6.3 6.3 6.3 6 m 0.7 0.7 0.7 0.7 0.7 1.2 n 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 connection style -03 n m6 q 51 0.1 connection style -07 o 8.3 8.3 8.3 8.3 0.5 p 21.75 21.75 21.75 21.75 0.5 awg type wire awg 20 awg 18 awg 16 awg 14 wire length 140 140 140 140 5
|